Data loss is never a fun experience, especially if that data is important to you. Unfortunately, sometimes things happen and your computer crashes, leaving behind a failed M.2 SSD. In this article, we’re going to share tips that can help you recover data from a failed M.2 SSD.

What is M.2 and Why is It Important?

M.2 is a form factor for solid-state drives that includes both controllers and storage devices. M.2 has the potential to offer high-performance, low-latency storage solutions compared to traditional SATA III SSDs. 

The purchase of M.2 has been slow due to its limited support in motherboard designs and chipsets. However, current M.2 drives have dropped in price and are becoming more widespread as OEMs add support for them in their systems. The reduced cost of M.2 compared to traditional SSDs makes it an attractive solution for applications such as machine learning and imaging that require a higher performance budget without penalty in terms of capacity or power consumption.

What can Go Wrong with an M.2 SSD?

An M.2 SSD can fail for a variety of reasons, including:

  • The SSD card is faulty
  • The connection between the SSD and the motherboard is faulty
  • The drive is defective
  • External factors such as extreme temperature or vibration can damage the drive

How to Recover Data from Failed M.2 SSD?

If your M.2 SSD has failed and you need M2 SSD recovery, there are a few things you can do. The first thing is to verify that the drive failed. If it’s just a loose connection, you may be able to fix it without data loss. However, if the drive has gone completely bad, repairing or replacing the drive may be necessary.

After verifying that the drive has failed, you should prepare for data recovery by creating an imaging environment. This will help prevent any accidental data loss while performing repairs or replacements. Once you have created an imaging environment, use tools like hard drive recovery service Expert or Acronis True Image 2017 to try and recover lost files from the damaged disk.

Preventing M.2 SSD Failures in the Future

As SSDs become more popular and more difficult to replace, it is important to understand how they work and the potential for data loss in the event of a failure. Effectively preventing M.2 SSD failures in the future requires understanding their design and common problems.

M.2 devices are designed as an ultra-small form factor internal storage option for laptops, ultrabooks, or tablets. They use a tiny memory card that plugs into a dedicated slot on the motherboard. While these drives are incredibly fast and compact, they are also sensitive to physical shock and vibrations that can cause data corruption or even complete drive failure.

Also Read- How To Protect Your Data With WD Drives?

To prevent M.2 SSD failures in the future, always follow these tips:

  1. Keep your laptop or computer in a stationary location when not in use to reduce physical shocks and vibrations that could damage the drive or data stored on it.
  2. Only install M.2 drives that are specifically certified by your laptop manufacturer or an official partner of theirs. Many third-party manufacturers produce uncertified M.2 drives that may result in data loss if installed on your computer.
  3. Do not overfill an M.2 drive – stuffing them full of files will increase the chance of corruption or damage due to vibration and shock during usage. The optimal storage density is typically 1TB per device (8GB per device).
  4. Always back up any important data onto an external hard drive before installing a new M.2 drive – in the event of a failure, data recovery may be difficult or impossible without a hard drive recovery service.
  5.  If you experience data loss or corruption due to an M.2 SSD failure, please contact your M.2 SSD recovery company.