Hard drives tend to stop working at some point. This is often because of power outages, viruses, or physical damage. However, when your hard drive dies and you can no longer access your files, it can be really difficult to do hard drive Data Recovery. When you try to boot the computer and your hard drive doesn’t respond or possible pulsating sounds are coming from the disc but you can’t access the drive, this means that your hard drive is dead. In such a situation, you might be concerned about the data present on the dead hard drive. To access the data, the dead hard drive needs to be fixed and it can be done by seeking expert help from us.
What Causes May Lead to a Dead Hard drive?
When a hard drive dies, it is typically because of one (or more) of the following reasons:
- Physical damage to the hard drive.
The most common reason for a dead hard drive is physical damage. This means that the hard drive has been physically damaged and can no longer be accessed by the OS or software. Physical damage can be caused by dropping, banging or even stepping on your computer. The most common form of physical damage is when a laptop battery fails to stay charged and drains itself out over time, causing it to lose contact with its casing and eventually die.
- Faulty Hardware
Sometimes hardware can fail without any user intervention at all. This happens when a piece of hardware inside your computer stops functioning properly due to overheating or other issues that have nothing to do with how you use it. Faulty hardware can cause a dead hard drive, but this isn’t always the case. In some cases, faulty hardware may only cause minor issues such as slower performance or freezing up for short periods before returning to normal functionality again.
- Mechanical Damage
The most common cause of a dead hard drive is mechanical damage. A mechanical failure occurs when there is a problem with the motor or one of its components. If you suspect that this problem has occurred, you should check if the hard drive is still in your computer and if so, then remove the hard drive from the enclosure.
- Software Failure
This type of failure is caused by a software error or virus. It can also be caused by a problem with the hardware itself, such as an electrical short circuit or a loose connection in the circuit board.
- Poor Maintenance
The biggest reason for a dead hard drive is poor maintenance. You should regularly back up your files and store them safely in another place than the computer which has crashed down. The best way to do this is to use external hard drives or flash drives.
How to Reinstate the Data
If your hard drive has stopped working, it’s important to act fast to try and salvage your data. We’ll show you how to reinstate the data on a dead hard drive.
First, you’ll need to connect the hard drive to a working computer. You can do this either by using an external hard drive enclosure or by connecting the hard drive directly to the motherboard with a SATA cable. Once the hard drive is connected, you’ll need to boot up the computer and open up Disk Management.
In Disk Management, you should see your hard drive listed as “Unallocated.” Right-click on the hard drive and select “New Simple Volume.” This will launch the New Simple Volume Wizard.
Follow the prompts in the wizard to format the hard drive and create a new volume. Once the process is complete, your data should be accessible once again. If you’re still having trouble accessing your data, you may need to use a professional data recovery service.
How to Prevent Data Loss from a Dead Hard Drive
It is so hard to fix the dead hard drive but it is not impossible. If your hard drive has died, it’s important to take action immediately to prevent data loss. There are a few things you can do to try to recover your data:
- Connect the hard drive to another computer. This will allow you to access the drive and see if any of your data is still accessible.
- Try a data recovery program. There are many programs available that can help you recover lost data from a dead hard drive.
- Send the hard drive to a data recovery company. If you can’t access your data yourself, there are professional companies that specialize in recovering data from dead hard drives.
- Reformat the hard drive. This will erase all of the data on the drive, but it may be necessary if you can’t access your data any other way.
- Replace the hard drive. If you’ve tried all of the other options and still can’t access your data, you may need to replace the hard drive entirely.
Also Read– Tips to Consider Before Choosing Hard Drive Data Recovery Service
Professional Data Recovery Services
To fix the data recovery issue of the hard drive, you can consult a professional of hard drive recovery in Melbourne. And if you don’t want to risk losing your valuable data, you can try to contact the Recovery Squad for help. They are trusted and dependable data recovery companies that can help you get the best solution for your problem.
