Are you having problems with RAID 0-6 Array?
Is there a power failure leading to your RAID failure?
Are you facing damaged RAID controllers?
Is your RAID volume inaccessible?
Do you need to get software or hardware of your RAID upgraded?
Is your RAID disk dead?
If you are facing any of the problems mentioned above, you need to reach out to Recovery Squad. We are a skilled team of professionals equipped with the right tools and software that provides solutions to recover data from all types of RAID (Redundant Array of Inexpensive Disks) systems.
RAID is an excellent system for higher speed and extensive data storage, offering considerably more data protection than non-RAID disk systems. However, data distribution and management are highly complex. In case of a RAID failure, you should only trust recovery specialists having experience, to help you with RAID data recovery.
Causes of RAID failure
RAID configuration has a high fault tolerance level. However, the failure of a single disk can affect the entire configuration. Common types of RAID failure are:
• File system corruption
• Accidental data deletion and formatting
• Formatted partitions
• Virus infection
• Single or more than one, drive failure
• Power surge, short circuit, etc.
• Controller failure, resulting in data loss
• Inaccessibility to RAID, after a system or application up gradation
• Liquid spill or excessive heat and fire damage
Our Expert RAID Data Recovery Services in Melbourne
Recovery Squad technicians have expertise in recovering files, photos, videos, documents, emails from RAID servers. We offer the following:
RAID data recovery services in Perth:
• Recovery from RAID 0, 5, and 6
We recover data from all inaccessible RAID 0, 5, and 6 servers. Our software works without a controller, to recover lost data even if the rebuild operation has failed.
• Recovery of lost or deleted partition
We scan the selected hard drive for missing partitions, which may have caused due to corruption. After the scan, all the missing partitions are successfully recovered and repaired.
• Data recovery from Media with bad sectors
Recovery Squad creates an image of your hard drive with bad sectors and then carries out recovery operations. Imaging helps in faster and safer recovery.
• Recovery of RAID Software and Hardware
We recover data from most complex RAID architectures. We have experience in recovering data from all hardware RAID configurations, including RAID 0 and RAID 6 levels.
RAID array levels for recovery:
• QNAP data recovery
• JBOND data recovery
• MS Hyper-V data recovery
• Equal logic data recovery
• Citrix data recovery
• Sun data recovery
• Novel RAID data recovery
• SNAP server recovery
• Drobo data recovery
• Netapp data recovery
What is the cost of data recovery from a RAID system?
The cost of RAID data recovery in Perth depends on many factors, which include configuration level of RAID, number of drives, operating system, data size to be retrieved, etc.
Recovery Squad provides top-notch data recovery services:
• Level-1 : Simple and common types of problems
• Level-2 : Severe damage
• Level-3 : Extremely complicated cases
To ensure trust, we always share recovery charges in advance and receive approval from our clients for the job to be done.
How long will it take to recover my lost data from RAID?
The time taken to recover lost data from RAID depends upon how fast you want it back.
Under our standard services, time taken is 3-5 business days on average.
If you need priority level services, the time taken is from 1-3 days, and at the emergency level, the turnaround time is 12 to 24 hours only.
We offer the fastest and most budgetary solutions for all data recovery services in Perth and Melbourne. We use only proven methods of data recovery to protect the critical data of our clients.
Why choose Recovery Squad?
If you haven’t already figured the answer to this, here are some more reasons why you should choose us:
• In-house research and development department, enabling us to resolve the most complicated problems
• Highly trained technicians, with 100 clean rooms, provide optimum solutions for any data recovery requirements
• Fast and customer friendly assistance available for 24 hours
• Initial consultancy and evaluation process
• Emergency response with on-site and remote assistance
Frequently Asked Questions (FAQs)
Does my RAID configuration level affect the data recovery process?
Configuration options make data recovery more difficult. But Recovery Squad provides quality RAID data recovery in Perth, is capable of treating any RAID array.
Can my data be remotely recovered?
Most of the time, it is very much possible to recover data by remote access. The exceptions are in case of physical damage of the RAID system.
What should I do to ensure a fast turnaround for my data loss?
Switch off the server immediately as soon as you discover failure symptoms. Don’t attempt to repair a damaged RAID array at your own. Otherwise, it may result in permanent data loss.
Is data recovery possible in the case of two failed drives?
Yes, it is possible. Recovery Squad offers RAID data recovery with its world-class tools and technology, ensuring safe recovery of lost data at a success rate of almost 100%.
Does the battery or power issue lead to a RAID failure?
Yes! RAID configuration is stored on a controller with an additional battery for power supply. In case of no power or even low battery, there will be damage in setting, harming the RAID array.
We re-striped / re-initialized, a RAID array, formatted it and then copied data back. Is data recovery possible from before the array was re-stripped / re-initialized?
It is still possible to recover data. However, it will also depend on the RAID controller’s functionality and the size of the data copied to the particular array.
I don’t remember the RAID parameters set to my RAID array. Is my data recoverable?
No problem! Recovery Squad professionals will choose all possible options for the corresponding parameters and reconstruct the RAID, making it possible for recovering data.